|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Climbing Technology Glue-in Belay Station-R
Climbing Technology Glue-in Belay Station-R is an anchor station with glue hooks that can withstand a heavy load.
It is used as a fixed insurance station at the points of the approximate end of the climbing route or at intermediate points on multipits and climbing climbs.
The elements of the station (2 glue anchors, a chain, 2 rings with a diameter of 40 mm and a carabiner) are made of stainless galvanized steel of the AISI 304 brand, which significantly increases the resistance to the negative effects of natural and various mechanical factors (erasure, damage), as well as corrosion.
An integrated non-removable carabine can be used to organize the descent.
Glue is not included, it must be purchased separately.
Climbing Technology Glue-in Belay Station-R specifications:
- Weight, g: 466 (1lb 0.4 oz)
- Ring diameter, mm: 40 (1.6 in)
- Diameter of adhesive anchor, mm: 12 (0.47 in)
- Length of the adhesive anchor, mm: 75 (4.0 in)
- Destructive load: 25 kN
- Material (s): AISI 316L stainless steel
- Certification (s): EN 959:2007, UIAA
- Made in the EU
- Reference: https://www.climbingtechnology.com/en/outdoor-en/anchors/belay-stations/glue-in-belay-station-r
MANUFACTURER
Climbing Technology™
Climbing Technology™ is a trademark of Aludesign S.p.A. (Bergamo, Italy), a company with more than 25 years of experience in the international production of personal protective equipment for mountaineering, climbing and rescue operations.
Aludesign S.p.A. has been in business since 1986 and is Europe's largest manufacturer of hardware for sport and industrial mountaineering. The modern production facility with an area of over 6,000 m2 makes it possible not only to produce more than 200 items of climbing equipment under its own brand Climbing Technology, but also to fulfil orders from other equipment manufacturers and many European companies.
Strong know-how and modern production technologies are used in the development and production of products intended for use in the mountains (mountaineering and climbing) and in all other industries related to work at height and rescue.
Climbing Technology is certified according to the ISO 9001:2008 quality management system, the ISO 14000 environmental management system standard, the safety requirements of the International Union of Mountaineering Associations (UIAA), and the relevant EU safety standards for personal protective equipment.
The entire production process is carried out in full compliance with European environmental directives.
The company's policy is aimed at achieving complete customer satisfaction and maintaining the ‘Made in Italy’ philosophy.
The company's values are in line with its way of life: listening to and respecting the customer and consumer.