|
Quantity
|
Out of stock
|
||
|
|
|||
Primus Winter Gas 230 g
Gas cylinders from Primus are used with all types of gas burners, cooking systems and lamps, as well as with other devices of the epi-gas standard.
The cylinder has a stable cylindrical base (d=10.8 cm), a modern sealing system and a standard structural critical pressure fuse in the form of a concave hemispherical bottom.
The internal screw connection of the Epi-Gas standard (11М1) is located on the valve on top of the cylinder, which allows it to be wound both on the connecting hose and directly on the device.
The self-sealing valve (Lindal B188) allows not to use the contents of the cylinder immediately, to quickly disconnect gas appliances for transportation and storage, or to change them as needed.
According to the innovative Vapor Mesh technology, an additional evaporator is placed inside Primus Winter Gas cylinders, which increases the evaporation area, the gas evaporates faster and Winter Gas cylinders work efficiently even at temperatures down to -22 ° C.
The contents of the Primus Winter Gas cylinder - a mixture of gases optimized for winter conditions:
- PROPANE, colorless, odorless (to make it easier to detect a leak, an odorant is added - ethyl mercaptan), non-toxic to humans, has a higher evaporation rate in cold weather, evaporation temperature: - 42.1 °C,
- ISOBUTANE, colorless, with a gasoline smell, ensures stable operation of the cylinder even with a small amount of gas, has a high calorific value, and also behaves better in colder weather, evaporation temperature: -11.7 °C,
The mixture is ecologically clean, a large amount of heat is released during combustion.
The mixture works best in the temperature range of -22°C (-7°F) to +10°C (50°F), lower or higher temperatures may increase fuel consumption.
Liquefied (liquefied) gas has a high volume expansion coefficient, so the container for its transportation or storage is usually filled to 85% of the volume.
The cartridge is compatible with all types of gas appliances of all manufacturers of the epi-gas threaded standard.
Seasons of effective use: winter, spring, autumn.
The cylinder has a stable cylindrical base (d=10.8 cm), a modern sealing system and a standard structural critical pressure fuse in the form of a concave hemispherical bottom.
The internal screw connection of the Epi-Gas standard (11М1) is located on the valve on top of the cylinder, which allows it to be wound both on the connecting hose and directly on the device.
The self-sealing valve (Lindal B188) allows not to use the contents of the cylinder immediately, to quickly disconnect gas appliances for transportation and storage, or to change them as needed.
According to the innovative Vapor Mesh technology, an additional evaporator is placed inside Primus Winter Gas cylinders, which increases the evaporation area, the gas evaporates faster and Winter Gas cylinders work efficiently even at temperatures down to -22 ° C.
The contents of the Primus Winter Gas cylinder - a mixture of gases optimized for winter conditions:
- PROPANE, colorless, odorless (to make it easier to detect a leak, an odorant is added - ethyl mercaptan), non-toxic to humans, has a higher evaporation rate in cold weather, evaporation temperature: - 42.1 °C,
- ISOBUTANE, colorless, with a gasoline smell, ensures stable operation of the cylinder even with a small amount of gas, has a high calorific value, and also behaves better in colder weather, evaporation temperature: -11.7 °C,
The mixture is ecologically clean, a large amount of heat is released during combustion.
The mixture works best in the temperature range of -22°C (-7°F) to +10°C (50°F), lower or higher temperatures may increase fuel consumption.
Liquefied (liquefied) gas has a high volume expansion coefficient, so the container for its transportation or storage is usually filled to 85% of the volume.
The cartridge is compatible with all types of gas appliances of all manufacturers of the epi-gas threaded standard.
Seasons of effective use: winter, spring, autumn.
Description of the Primus Winter Gas 230 g cylinder:
- Gas weight (netto): 230 g (8,1 oz)
- Cylinder weight (gross): 390 g (13,8 oz)
- Balloon dimensions: d=10,8 х 8,5 сm (4,3 х 3,3 in)
- Fastening: screw, standard epi-gas (11M1)
- Operating temperature: from -22°C (-7°F) to +10°C (50°F)
- Gas composition: Propane, Isobutane
- Gas weight (netto): 230 g (8,1 oz)
- Cylinder weight (gross): 390 g (13,8 oz)
- Balloon dimensions: d=10,8 х 8,5 сm (4,3 х 3,3 in)
- Fastening: screw, standard epi-gas (11M1)
- Operating temperature: from -22°C (-7°F) to +10°C (50°F)
- Gas composition: Propane, Isobutane
WARNING !
- The cartridge must be stored away from children, in a dark, dry and cool place
- Do not expose the cartridge to long-term exposure to direct sunlight and heat above 35°C
- Installation and dismantling of the balloon must be carried out in an open area or in a well-ventilated room
- It is forbidden to place the device on a gas or electric stove and to place tiles or gas cylinders near electrical appliances
- It is impossible to pierce holes in the walls of a filled cylinder, as well as to hit and deform it
- After use, do not throw the empty cylinder into the fire, it can be punctured to release gas and condensate residues and handed over for scrap metal
- At low temperatures, it may be necessary to preheat the balloon using human body heat, a chemical or electric heater, etc.
- It is not recommended to carry out amateur refilling of the cylinder, since the manufacturer does not provide for their refilling
- The cartridge must be stored away from children, in a dark, dry and cool place
- Do not expose the cartridge to long-term exposure to direct sunlight and heat above 35°C
- Installation and dismantling of the balloon must be carried out in an open area or in a well-ventilated room
- It is forbidden to place the device on a gas or electric stove and to place tiles or gas cylinders near electrical appliances
- It is impossible to pierce holes in the walls of a filled cylinder, as well as to hit and deform it
- After use, do not throw the empty cylinder into the fire, it can be punctured to release gas and condensate residues and handed over for scrap metal
- At low temperatures, it may be necessary to preheat the balloon using human body heat, a chemical or electric heater, etc.
- It is not recommended to carry out amateur refilling of the cylinder, since the manufacturer does not provide for their refilling