Sea to Summit Alto TR1 Plus Fabric Inner is an ultra-lightweight one-person touring tent that combines space and comfort - one of the best in its class for three-season camping.
The Alto TR1 Plus is a complete analogue of the Alto TR1 tent except for the inner tent, it is fully fabric except for the windows.
Tension Ridge Architecture is a patented design that provides the best possible ratio of usable living space, height, weight, ventilation and gives you the most possible living space, especially in the head and shoulder area when you are sitting in the tent.
In most lightweight tents, the cross-bars at the top of the tent are angled downwards, the Tension Ridge cross-bar is attached to the console at an upward angle, thereby increasing the vestibule height and living space of the tent.
The Apex Vent located on the top of the tent provides up to 70% improved airflow and can be adjusted from inside the tent, effectively removing warm air and humidity, preventing condensation.
The Baseline vents at the bottom of the tent create a highly controlled and manageable ‘climate system’ that maintains a comfortable sleeping environment
The combination of the ventilation system and the large doors helps to achieve exceptional climate control and airflow.
With Hangout technology, the awning can be set up separately, without using the inside of the tent, and can be used as a shelter from the sun or rain (a pair of trekking poles or a set of poles are required).
DAC's robust arches are made from the highest quality alloy and are customised using precision processes.
The Sea to Summit uses a combination of Featherlite NSL, NFL and PRESSFIT struts in various sizes to add rigidity and strength where it is needed most.
The DAC eco-friendly anodising process uses less toxic chemicals and water than traditional methods.
The nylon tent fabric with silicone and polyester polyurethane coating provides excellent hydrolytic stability and long-lasting waterproof performance in the most challenging conditions.
The 30D nylon inner tent's 15cm (6in) deep high bottom can withstand a hydrostatic pressure of 8000mm - ideal for wet and muddy conditions.
The lightweight nylon inner tent fabric protects against draughts and wind.
Quick Connect is a convenient system for quickly adjusting the tension of the tent ties.
Strong pegs of special TriPoint design with several notches made of Al 7075-T6 alloy provide a secure fixation.
The covers included in this smart system have a dual purpose - they can be attached to the tent to create a light-diffusing light panel or provide additional storage space.
Sea to Summit Alto TR1 Plus is designed for hiking, cycling and
motorbike trips, hitchhiking, etc.
For better protection of the tent bottom from mechanical damage, we recommend purchasing a removable floor or simply pitching the tent on any bedding, piece of polyethylene, etc.
Season of use: spring, summer, autumn.

 

Description of the tent Sea to Summit Alto TR1 Plus Fabric Inner:
- Two-layer tent with 1 entrance and 1 vestibule 0.7 m2
- Capacity:    1 adult of stocky build
- Total weight in the package, kg:    1.228 (43.3 oz)
- Weight (Tent+Arcs+Pegs):    0.781 (27.6 oz)
- Dimensions of the unfolded tent (L x W x H), cm:    225.0 x 175.0 x 108.0 (88.6 x 68.9 x 42.5 in)
- Internal tent dimensions (L x W), cm:    215.0 x 107.0 / 60.0 x 105.0 (84.6 x 42.1 / 23.6 x 41.3 in)
- Packaged dimensions, cm:    44.0 x 11.0 x 11.0 (17.3 x 4.3 x 4.3 in)
- Awning fabric:    Nylon 15D Rip-Stop Sil-PeU coated 1200 mm waterproof, colour green
- Sleeping compartment:    Nylon 20D Rip-Stop
- Tent bottom:   Nylon 20D Rip-Stop Sil-PeU coated 8000 mm waterproof.
- All seams are glued
- Frame:   Al DAC alloy 8.7/9.5 mm
- Tension Ridge Architecture frame design for the best possible living space to weight ratio
- The tent can be assembled without the tent or vice versa, you can put the tent without the tent
- Apex Vent ventilation system at the top of the tent
- Baseline vents at the bottom of the tent
- TriPoint Y-shaped pegs made of Al 7075-T6 alloy
- Convenient tie-downs with Quick Connect tensioning system
- Modular FairShare storage system consisting of 3 covers

 

Guarantees
The warranty period is 1 year.
If a brand product fails due to a manufacturing defect, we will repair or replace it free of charge at our discretion.
This warranty applies only to original, unmodified and unmodified products and workmanship.
This warranty does not cover damage caused by accident, improper care, negligence, normal wear and tear, weather conditions (wind, rain, fire, animals, etc.) or natural fading of colors and materials.
This warranty does not cover consequential damages or any other damages arising from any defect in the product.
Damage that is not covered by the warranty can be repaired at a reasonable price.