Biolite Campstove 2+ wood-charging burner

The latest BioLite CampStove 2 + FlexLight wood burner, which, in addition to heating food, also generates electricity for charging flashlights, mobile phones and other gadgets necessary for outdoor recreation.
Provides cooking or boiling water in a matter of minutes, works exclusively on firewood:  sticks, wood scraps, chips, brushwood, pellets, etc.
It is easy to install, with the help of a fan (blowing) it gives a hyper-efficient flame without smoke and burning with productivity (efficiency about 70%), which is not inferior to gas burners.
Generates up to 3 Watts with a voltage of 5 V (up to 600 mAh) by burning wood to charge gadgets, flashlights and other small appliances via the USB port.
Thanks to the four stages of operation of the fan, you can set different modes of burning and cooking food accordingly.
Built-in Smart LED panels show:   battery charge levels, fan operating modes, flame intensity.
Set:  case, manual, USB/Micro USB cord, burner, thermoelectric generator, built-in battery with a capacity of 2600 mAh.
The set also includes a FlexLigh flashlight with ChromaReal LED technology for cooking in the dark.
Packs to the size of a 1.5L wide-mouth water bottle.
Description of the Biolite Campstove 2 + FlexLight charging burner:
- Weight, g:   935 (2.06 lbs)
- Boiling time:    1 liter in 4.5 minutes
- Package size:   210 x 127 mm
- Charging time:   not limited, depending on the gadget
- Micro USB connector for charging the built-in battery
- USB output for recharging gadgets in working mode 2A, 5V
- Peak power:   3 Watts
- Flashlight power:   100 lumens
- Packaging:   a cover made of dense material

WARNING ! WE RECOMMEND!
- before the first use, charge the thermoelectric generator from the network or computer at home
- do not use means for ignition of unnatural origin (dry alcohol, liquid fuel) and burn greens and wet or rotten firewood
- place the burner so that the thermogenerator is on the windward (cold) side, this will significantly increase the efficiency of its work and prevent the fire from melting its surface
- keep in mind that the hotter the weather, the less efficient the thermocouple works and therefore the generated current may not be enough to charge your gadget
- during operation, the metal case heats up very much, in order to avoid possible burns, we recommend using a glove made of tarpaulin, etc.