Adjustable positioning lanyard Petzl Progress Adjust-I 2 m

Petzl Progress Adjust-I - lanyard with one adjustable arm for positioning.
An adjustable dynamic rope which, in combination with a drop stopping device, provides convenient positioning at the workstation when the user has leg support.
The protective sheath protects the rope from abrasive surfaces and improves the sliding of the rope, this protection can be removed, allowing the user to come closer to the anchor.
Thanks to the Petzl Adjust rope regulator, the length can be adjusted quickly and easily.
Petzl Captiv Adjust and Stuart accessories help keep the clamp and carabiners in position.
Can be used in two ways:
- in single mode with the Petzl Adjust rope regulator at the ventral attachment point of the harness, when the anchor is located above the user, so that the load is conveniently distributed between the belt and the leg loops;
- in double mode on the attachment points on the sides of the harness, this type of attachment ensures a better distribution of the load on the belt.
Features of Petzl Progress Adjust-I:
- smooth and precise length adjustment with Petzl Adjust clamp;
- the clamp has a special hole for the quick release lanyard;
- the Petzl Captiv Adjust positioning bar helps hold the Petzl Adjust clamp;
- can be used with the Petzl Vertigo carabine and Petzl Tanga retainer when the rope adjuster is at anchor;
- the Petzl Stuart accessory helps to keep the connector in its proper position when the rope regulator is ventral to the abdominal attachment point of the system;
- individual marking on a plastic sheath to track equipment throughout its service life;
- available in three lengths: 2, 3 and 5 m, the length of the rope is easily determined by marking on the end sleeve;
- compatible with Petzl Ok, Am'D, Bm'D and Oxan carabines (not included).

Attention!  Designed for use below the attachment point.
Self-insurance is not a jerk shock absorber and cannot be used in this capacity if a failure with a jerk factor greater than 1 is possible.

Specifications Petzl Progress Adjust-I 2 m:
- Weight, g:  300 (10.6 oz)
- Rope diameter, mm:  9 (0.35 in)
- Length of adjustable mustache, cm:  5 - 200 (5.9 - 6ft 6.7 in)
- Material (s):  aluminum, Nylon, Polyester, High Modular Polyethylene (HMPE), Elastomer 
- Certificate (s):  CE EN 358, EAC, ANSI Z359.3, CSA Z259.11, GB 24453 / WQX, GB 30862 / B
- Made in the EU
- Reference:  https://www.petzl.com/INT/en/Professional/Lanyards-and-energy-absorbers/PROGRESS-ADJUST-I-positioning-lanyard

MANUFACTURER

Petzl

Whether you are involved in working at height, industrial mountaineering or simply an avid caver or climber, you are no doubt already familiar with Petzl products.
Today, PETZL is the world leader in the production of products for climbers and cavers, with about 200 patents and ISO 9001 and UIAA quality certificates.
All Petzl products are made of modern high-quality materials, which creates the perfect balance of weight, reliability and user comfort.
Many well-known athletes, including skiers, climbers and professional cavers, choose Petzl equipment exclusively.
When you pick up any Petzl product, you will feel the highest quality, thoughtfulness and craftsmanship.
The company's distributors operate in more than fifty countries.