Belay device Climbing Technology Be-Up Kit

Climbing Technology Be-Up Kit - a set consisting of a multifunctional belay/descender with a patented innovative design and an HMS carabiner.
Included:
- Climbing Technology Be Up belay/descender;
- HMS carabiner with Climbing Technology Concept SGL screw coupling. 

Be-Up Kit has a wide range of applications in various types of vertical activities: mountaineering, rock climbing, tourism, canyoning, etc.
Recommended for use with climbing ropes: double and half Ø 7.3 - 9.0 mm, single Ø 8.5 - 10.5 mm.
Be-Up is an evolution of tube-type belay devices (tube, "glass", "basket"), where braking is carried out by clamping the top between the belay device and the carabiner.
This intuitive device allows you to use a modular braking system, which allows you to optimize the braking process with all types of rope under load, without applying much effort to the belayers, and to automatically block and lock the rope within two seconds.

The Climbing Technology Be-Up belay device allows:
- To smoothly belay the leader in the bundle during the ascent, the special design of the device allows you to quickly, smoothly, without delay to release or select the rope;
- When using two ropes when belaying the leader, the device allows you to release one rope, while the other "half" can be blocked (locked);
- To use an effective modular braking system: special "V"-shaped notches are specially designed to ensure optimal braking when the participant breaks or descends without applying much effort;
- Use Guide Mode to belay the participant during the ascent: at the station, the belayer uses an additional carabiner with a threaded coupling, which allows the rope to be automatically blocked in the event of a fall of the lower participant in a matter of seconds, also thanks to the use of an additional carabiner and two "halves" the skin rope can perform
- Easily unlock the ropes under load for a smooth descent, to do this, simply insert the carabiner into the unlocking hole and create a "lever" to reduce the load, "V"-shaped notches allow you to effectively control the descent speed, do not twist the rope;
- Quickly switch from belay mode to ascent to leader belay mode. 

Be-Up is made of durable hot-forged aluminum alloy and steel cable in a plastic case for ease of use, Al alloy carabiner.
ATTENTION!  Read the instructions for use carefully before use.

Features of the Climbing Technology Be-Up belay device:
- Device weight, g:  159 (5.6 oz)
- Rope compatibility, mm:  7.3 - 10.5 (0.28 - 0.41 in)
- Materials:  Al alloy, stainless steel
- Certification:  EN 15151-2:2012 type 4
- Link:  https://www.climbingtechnology.com/en/outdoor-en/belay-devices/tubes2/be-up
- Made in Italy

Features of the Climbing Technology Concept SGL HMS carabiner:
- Carabiner weight, g:  77 (2.7 oz)
- Maximum dimensions, cm:  10.5 x 7.3 (4.1 x 2.9 in)
- Opening width, cm:  2.1 (0.8 in)
- Breaking load along the longitudinal axis:  23 kN
- Breaking load along the transverse axis:  10 kN
- Breaking load with the latch open:  8 kN
- Materials:  Al alloy
- Pear-shaped shape (HMS) ensures safe sliding of the rope through the carabiner - optimal for use with belay devices
- Catch-Free latch lock (carabiner nose and latch without hooks) reduces the likelihood of the carabiner catching on other equipment
- Equipped with the ACL system (additional wire latch in the lower part carabiner) to prevent cross-loading
- Carabiner certification:  EN 12275:2013-H, EN 362:2004-A/T and UIAA-121, individually tested
- Link:  https://www.climbingtechnology.com/en/outdoor-en/carabiners/concept2/concept-sgl
- Made in Italy

MANUFACTURER

Climbing Technology™
Climbing Technology™ is a trademark of Aludesign S.p.A. (Bergamo, Italy), a company with more than 25 years of experience in the international production of personal protective equipment for mountaineering, climbing and rescue operations.
Aludesign S.p.A. has been in business since 1986 and is Europe's largest manufacturer of hardware for sport and industrial mountaineering. The modern production facility with an area of over 6,000 m2 makes it possible not only to produce more than 200 items of climbing equipment under its own brand Climbing Technology, but also to fulfil orders from other equipment manufacturers and many European companies.
Strong know-how and modern production technologies are used in the development and production of products intended for use in the mountains (mountaineering and climbing) and in all other industries related to work at height and rescue.
Climbing Technology is certified according to the ISO 9001:2008 quality management system, the ISO 14000 environmental management system standard, the safety requirements of the International Union of Mountaineering Associations (UIAA), and the relevant EU safety standards for personal protective equipment.
The entire production process is carried out in full compliance with European environmental directives.
The company's policy is aimed at achieving complete customer satisfaction and maintaining the ‘Made in Italy’ philosophy.
The company's values are in line with its way of life: listening to and respecting the customer and consumer.