Quantity
|
Out of stock
|
||
|
Cooking system Kovea Alpine Master 3.8 L
The basic set includes an aluminum two-liter pot with integrated wind protection and heat exchanger and an aluminum pan lid with a folding handle.
The burner is equipped with protection against blowing, a heat-efficient splitter based on SCS (Surface Combustion System) technology and a gas supply regulator, it does not have a built-in piezo igniter.
It is designed to work with threaded cylinders (epi-gas) with a self-sealing valve (Lindal B188).
The power of the burner of the Kovea Alpine Master system is 2.23 kW (7600 BTU), it can boil 1 liter of water in 2 minutes 40 seconds with the consumption of 7.2 grams of gas.
Each 100 g of gas allows you to boil about 14 liters of water, that is, on average, you can boil the full capacity of the system (3.8 liters) 3.5 times times with the help of one 100 g cylinder.
The set also includes a folding plastic stand for threaded gas cartridges, which increases the support area and, accordingly, the stability of the entire system during cooking.
All elements of the system are placed inside the barrel together with a 230 g gas cylinder (the cylinder is not included).
The Kovea Alpine Master 3.8 L kit includes an adapter-stand on which you can install ladles of a different design and larger volume, as well as pans.
- Weight: 1053 g (37.2 oz)
- Capacity: 3.8 l. (134.0 oz)
- Dimensions when unfolded: -
- Folded dimensions: 20,3 х 20.3 х 24,0 cm (8.0 x 8.0 x 9.4 in)
- Power: 2.23 kW (7600 BTU)
- Water boiling time: 1 liter / 2 minutes 40 seconds
- Gas consumption for boiling water: 1 liter / 7.2 g. (0.25 oz)
- Gas consumption for 1 hour of operation: 162 g (5.7 oz)
- Burning time for 1 cylinder: 100 g - 37 min., 230 g - 1 hour 25 min., 450 g - 2 hours 47 min. (balloons are not included)
- Maximum diameter of dishes for installation on the burner: 23 cm (9.1 in)
- Power supply: gas cartridges-cylinders with threaded fasteners (epi-gas) with a self-sealing valve (Lindal B188)
- Piezo igniter: absent
- Materials: stainless steel, anodized aluminum, silicone
- The set includes two transport covers
- compact and reliable piezo igniter
- a stand for a gas cylinder, which significantly increases the support area and ensures the stability of the burner during cooking
WARNING ! We recommend pouring water to a level no higher than 2 cm to the edge of the pan - in case of sharp boiling, steam with boiling water may escape from under the lid, which can cause burns.