|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Hand clamp Camp Turbohand PRO Right
Camp Turbohand PRO Right - innovative clamp type ‘jumar’ type with a right-handed handle. The color is red.
Designed for the most effective lifting on a rope with a diameter of 8 to 13 mm.
The strong housing is made of aluminum alloy 3.5 mm thick, its geometry is tested for use on traverse.
The ergonomic rubber handle is quite wide and long for grabbing with two hands, the handle and rope are leveled on the same plane for the best control and efficiency.
It has a patented roller, which not only helps to increase the efficiency of lifting, making sliding upwards much smoother, but also reduces the dangerous wear of the device, where the rope tends to rub on the body of a traditional jumar. The roller also allows the use of Turbohand as a locking roller for a light drag with a maximum load of 50 kg.
Has a cast handle and ergonomic upper part for a convenient grip with one or two hands.
The toothed cam has a special anti -drawing treatment and has drainage holes to prevent dirt and sand. The opening system is protected from both sides to prevent accidental opening.
The removable guide rope at the bottom of the handle optimally aligns the rope for long lifts and prevents the crossing of the carbine with a rope.
It has three large mounting points, two from the bottom and one at the top, for the optimal organization.
Features of the Camp PRO clamp:
- Weight, g: 198 (6.9 OZ)
- Compatibility with ropes, mm: from 8 to 13 (0.31 - 0.51 in)
- Dimensions (L x W x H), cm: 18.5 x 9.5 x 2.2 (7.3 x 3.7 x 0.7 in)
- Materials: aluminum, stainless steel, rubber
- Design with a patented roller increases the efficiency of rope movement and reduces wear
- An ergonomic rubber handle provides a convenient grip by both one and two hands
- A wide hole allows you to easily grasp the handle even in thick gloves
- Ergonomic upper part maximizes force while pulling with two hands
- A toothed cam with holes for self -cleaning from dirt and ice
- Two wide lower releases allow you to easily fasten two carbines
- Opening system is protected from random opening
- Upper hole to fix the carbine on a rope
- Certification: CE EN 567, EN 12841/B
- Link: https://www.camp.it/m/us/us/us/work/product/2155
- Made in Italy
MANUFACTURER
Camp
Camp (C.A.M.P., Concezione Articoli Montagna Premana - mountain equipment from Premana) is an Italian company, one of the world's leading manufacturers of equipment for outdoor recreation and sports, mainly mountain views: rock climbing, rock climbing, trekking, caving, tourism, as well as industrial safety.
It was founded in 1889 in the north of Italy in the small village of Premana by the blacksmith Nicola Codega and initially specialized in the manufacture of forged products for everyday needs, in particular the production of bells for livestock. In 1920, the first ice axes under the brand name S.A.M.P. were made by order of the army, and after the start of cooperation with one of the leading climbers in Italy, Riccardo Cassen, he completely turned to the manufacture of sports equipment.
The most important characteristic of any climbing tool is the weight and weight reduction itself for maintaining all standards of strength, reliability, durability - one of the highlights of C.A.M.P. products Twenty years ago, C.A.M.P. set a carbine weight record - 33 grams, twenty years later in 2007, C.A.M.P. broke its record - a new The Nanowire carbine that appears weighs 28 grams! Currently, almost every section of the catalog has samples of record low weight.
C.A.M.P. also won respect as a brand of equipment for industrial needs: high-altitude work, rescue operations, the army and special services of many countries preferred a brand with a century of history.
Currently, C.A.M.P. is part of the CAMP Group, also combines the Cassin and CAMP Safety brands.
Now, at the beginning of the new millennium, C.A.M.P. is ruled by the fourth generation of the Codega family: Eddie, Paolo, Antonio, Giovanni, Isacco and Andrea. Like their predecessors, they do not change the company's strategy. Strategy of innovation, high quality and good brand name C.A.M.P..
It was founded in 1889 in the north of Italy in the small village of Premana by the blacksmith Nicola Codega and initially specialized in the manufacture of forged products for everyday needs, in particular the production of bells for livestock. In 1920, the first ice axes under the brand name S.A.M.P. were made by order of the army, and after the start of cooperation with one of the leading climbers in Italy, Riccardo Cassen, he completely turned to the manufacture of sports equipment.
The most important characteristic of any climbing tool is the weight and weight reduction itself for maintaining all standards of strength, reliability, durability - one of the highlights of C.A.M.P. products Twenty years ago, C.A.M.P. set a carbine weight record - 33 grams, twenty years later in 2007, C.A.M.P. broke its record - a new The Nanowire carbine that appears weighs 28 grams! Currently, almost every section of the catalog has samples of record low weight.
C.A.M.P. also won respect as a brand of equipment for industrial needs: high-altitude work, rescue operations, the army and special services of many countries preferred a brand with a century of history.
Currently, C.A.M.P. is part of the CAMP Group, also combines the Cassin and CAMP Safety brands.
Now, at the beginning of the new millennium, C.A.M.P. is ruled by the fourth generation of the Codega family: Eddie, Paolo, Antonio, Giovanni, Isacco and Andrea. Like their predecessors, they do not change the company's strategy. Strategy of innovation, high quality and good brand name C.A.M.P..